Ventilation and reduction engines
Showing 1–40 of 42 results
-
SHORT BEARING FOR 1 ” TUBE
1,35€ -
1/2″ CHAIN UNION SPLIT
0,50€ -
60 mm. 2″ BRIDLE FOR BEARING
0,45€ -
90 mm. 3″ BRIDLE FOR BEARING
0,55€ -
ALUMINIUM ZIPPER CLAMP
0,60€ -
BIG MANUAL REDUCTOR, ROLLING WINDOW
80,00€ -
BRIDLE 2.5″ FOR FIXED ARM 76mm
0,50€ -
CHAIN ROLL 1/2″ 5m
8,00€ -
CLIP TUBE PVC 32mm
0,32€ -
CURVE RACK 2mm 1.10 m
2,10€ -
CURVE RACK 2mm 1.30 m
3,50€ -
DOUBLE ARM WITH 1″ BEARING
8,00€ -
EXTENSION CRANK REDUCER ROLLER
15,00€ -
FIXED ARM 60mm. 2″ WITH BEARING FOR 1″ TUBE
1,75€ -
FIXED ARM 90mm. 3″ WITH BEARING FOR 1″ TUBE
1,85€ -
FIXED ARM FOR 2.5″ WITH BEARING FOR 1″ TUBE – 76mm
1,80€ -
FLANGE BEARING 1″ FOR TUBE 1″
1,50€ -
FLANGE FOR ZIPPER AND SQUARE TUBE 25×25
0,25€ -
HANDLES WITH BRAKE VARIOUS SIZES 33/42/60/76/90/110
18,00€ -
JOINTS FOR TELESCOPIC ARM
30,00€ -
LARGE ENGINE 100NM 0.09kw WITH CHAINS AND PIÑONS
450,00€ -
MANUAL REDUCTOR WITH HANDLE FOR TELESCOPE TUBE
80,00€ -
MEDIUM ENGINE 100NM 0.09kw WITH CHAINS AND PIÑONS
400,00€ -
MOTOR BRACKET
12,00€ -
PLATE OF 50 TEETH
17,00€ -
PLATE OF 70 TEETH
23,00€ -
PLATE OF 85 TEETH
40,00€ -
ROLLER ZIPPER PINION
2,80€ -
ROLLER ZIPPER PINION – MAT.
5,00€ -
ROLLER ZIPPER PINION D.G
3,60€ -
ROLLING ENGINE
410,00€ -
SMALL 24V ROLLING MOTOR
200,00€ -
SMALL ENGINE 100NM 0.09kw WITH CHAINS AND PIÑONS
345,00€ -
SPECIAL ENGINE 100NM 0.09kw WITH CHAINS AND PIÑONS
675,00€ -
STEEL TUBE CONNECTOR “32mm” WALL 5mm 2 HOLES
1,20€ -
STRAIGHT RACK 2mm 1.30 m
3,00€ -
STRAIGHT TUBE BEARING 1″
1,50€ -
TELESCOPIC ARM AND GEAR MOTOR COUPLING
12,00€ -
TELESCOPIC ARM BAR COUPLING
10,00€ -
TELESCOPIC ARM H1800
150,00€
